The SPS ADVANCE R UPS series by Salicru is specially intended for installation on racks with high occupancy density and, with a height of only one U, allows room to be freed up for other devices.
Technical Specifications:-
Technology- Line-interactive
Format- Rack 1U
Input-
Rated voltage- 230 V
Voltage range- 100% load 165 ÷ 290 V
Stabilizer- AVR (Buck & Boost)
Rated frequency- 52 / 60 Hz (auto-detection)
Frequency range- ±5 Hz
Autodetection of frequency- Yes
Protection- Fuse
Output-
Rated voltage- 230 V
Voltage accuracy (battery mode)- ±10%
Power (VA/W)- 1500 / 900
Total harmonic distortion (THDv)- <5% linear load / <10% non-linear load
Waveform (battery mode)- Pure sine wave
Frequency- 50/60 Hz (same as input)
Frequency accuracy (battery mode)- ±1 Hz
Compatibility with APFC loads- Yes (1)
Performance Stabilizer mode (AVR)- >92%
Performance Battery mode- >80%
Performance in mains mode- >95%
Admissible overloads in battery mode- 110% for 1 min / 130% immediate
Admissible overloads in-line mode- 110% for 1 min / 130% immediate
Socket type- IEC C13
No. Of sockets- 4
Battery-
Battery type- Pb-Ca sealed, AGM, maintenance-free
Charge type- I/U (constant current/constant voltage)
Recharge time- 4 hours to 90%
User replaceable battery- Yes
Battery test- Automatic on each start-up + manual
Communication-
Ports- RS-232 / DB9
Intelligent slot- Slot for SNMP/potential-free contacts/ MODBUS
Monitoring software- For Windows, Linux and Mac
Values- Input and output voltage / % load / % battery / backup
Levels- Connected load / overload / battery / low battery
Operating modes- Normal / Stabilization (AVR) / Battery / Fault
Alarm- Battery / low battery / overload / failure
Audible- Every 30 s for battery operation. Every 2 s for low battery / Polarity. Every 0,5 s for overcharge. Continuous for fault.
Failure Display- LCD
Dimensions
Depth (mm)- 485
Width (mm)- 433
Height (mm)- 44
Weight:-
Weight (kg)- 15.83
Manufacturer Part No | 6A0RP000013 |
---|